Recent content by dbuerer

Sounds great. I assume it's a relay panel you're using - in that case you're using this PICS: https://leviton.com/content/dam/leviton/lighting-controls/controls/product_documents/none/BACNET%20Pics%20Statement%20GreenMAX%204.09%20A.pdf If however you're interfacing with an NP00G you will want...

@Tdubbz45 - the fact that you see it in YABE means there is BACnet communication between your computer and the panel you're communicating with which also confirms that part of the system is configured appropriate. I would next confirm connectivity between your BMS and the panel as that is...

LumaCAN 2 (LC2) GreenMAX relay panels were discontinued in 2013 in favor of a revised LumaCAN protocol called LumaCAN 3 (LC3). The LC3 products offer both improved network efficiency and an improved user experience. The two protocols however are incompatible with each other. You can not use LC3...

In some situations the HDU will get vertical lines or other screen anomaly during startup making the screen hard to read. We have investigated this issue and determined that the root cause is to a specific unique sequence of events which can occur during Windows CE startup/boot. Windows CE...

This post documents the nearly exhaustive feature list of the My Building software package. Links to detailed articles are provided where they are available. If you see something missing or would love to see a new feature please leave a comment! Table of Contents Deployment Paid vs. Free...

It's based on how it's wired but.... 1 channel is always 1234 2 channel could be 123, 234, or 12,34 3 channel could be 12, 23, or 34 4 channel is always 0

Please look for the room to room feature coming out later this year.

What end result are you trying to achieve?

The valid values are supposed to be: 0, 12, 123, 1234, 234, 34 and 12,34 15 is not a valid value. I would try resetting to factory defaults and try again. Also, configure before you start lumascript

Leviton does not support virtualization of LumaGraphics . The product is only support on Leviton provided hardware running the Windows 10 operating system. LumaGraphics uses Microsoft Active X technology which is only supported on Internet Explorer and as of Windows 11 has been generally phased...

There are some points to consider when making a decision about which buildings should be part of a project. Obviously if it's different owners and customers it should be a different project, what about multi-tenant spaces? What about city/school buildings? This content aims to address some of...

I'm not sure "astatic" is the correct word ;) OSR15 is designed for 8-12' mounting heights . Performance outside of that range may vary. Recommend you use one of our low voltage mid/high bay sensors for this application feeding a DRID0.

A project license determines the features that are available to a project. There are many features which are available for no additional charge and do not require the specific creation or modification of a license, however, others, like BACNet, require specific license. Users that can create...

DALI addresses are made available to BACnet when an NP00G is used as the BACnet interface.

Not directly. You would need to add a DRC or Sapphire as well for the front end.